Skip to main content

Various Environmental Pollutants and Their Terrible Effect on Our Environment

Environmental pollution is the introduction of harmful materials caused by pollutants into the environment. Pollutants are the various impurities that have found their way into the environment due to both human activity and natural causes thus leading to pollution. These chemical compounds are harmful to both life and the environment.The WordWeb dictionary defines pollutants as "waste matter that contaminates the water , air or soil."

According to environmentalists and scientists, there are various types of pollutants, and are classified according to the type of pollution they cause - such as water,air,soil,noise and radioactive pollution.Other types include thermal, plastic, agricultural, and light pollution.In view of all these,this article seeks to list and explain the various types of pollutants present in the environment.

            
  1. Chlorofluorocarbons (CFC)

These are gases that are very destructive to the protective ozone layer. CFCs are used in sprays,perfumes and other canned products including aerosols.Since they are lighter than air,they rise to the atmosphere where the ultraviolet light frees the chlorine.

If the chlorine gets in  contact with the earth's protective ozone layer, it causes irreparable damage which leads to entry of cosmic rays that are carcinogenic to human beings and the deterioration of marine and terrestrial plant growth.

2. Lead

This is a dangerous toxin found across the world, in fact, in all states. The element readily dissolves in water and upon uptake leads to devastating health problems. It negates the work of body's enzymes thereby slowing down the normal functioning of the body.In addition to this, it is one of the causes of nervous breakdowns,for in large quantities,it ends up affecting the brain.

3. Methane

This is a major component of natural gas, the gaseous form of fossil fuel. In itself it is harmless to the environment.However , it is one of the greenhouse gases and when it reacts with carbon dioxide in the presence of water vapor, it absorbs and retains most of the radiation heat from the sun. This traps excessive heat in the atmosphere contributing to global warming and climate change.

4. Carbon monoxide

This is one of the most lethal pollutants of the air. It is produced in various instances like cigarette smoking and whenever there is incomplete combustion. For vehicles to run, for example, the fuel in them has to undergo combustion to move the pistons that power the engine. The same applies to various machinery fuel powered equipment in industries.

But since space within the engine is compacted and at times do not allow in enough oxygen for complete combustion, the fuels composed of a high hydrocarbon concentrations do not fully combust,releasing carbon monoxide as a byproduct.

Carbon monoxide clogs the air making it hard to breathe. It is also one of the leading causes of deaths associated with suffocation in homes where firewood is used in enclosed spaces. Carbon monoxide also plays a huge role in the formation of ground-level ozone.

5. Particulate matter (PM)

These are the very small particles suspended in the air. They can either be in solid form or in liquid form in both organ and inorganic particles. They are released into the atmosphere due to incomplete combustion like the carbon particles or blown into the air by wind. Examples are pollen,dust,soot, and aerosol spray liquid droplets just to mention a few.

They are very tiny and can, therefore, be easily inhaled. They cause respiratory problems such as lung cancer and are even more harmful to sensitive people especially those who suffer from asthma attacks.

6. Nitrogen oxides

There are many types of nitrogen oxides,most of which are harmful to the environment.These include : nitric oxide,nitrogen dioxide, nitrogen monoxide, and nitrogen pentoxide. The formation of these oxides happens in the atmosphere where nitrogen readily combines with oxygen at high temperatures.

Nitrogen dioxide has an irritating odor that also contaminates the air.Like sulfure dioxide,nitrogen dioxide combines with oxygen and water to form acid in the form of nitric acid thus leading to premature death, health complications, and corrosion of roofs.

7. Sulfur dioxide

This is the main ingredient of acid rain, which results in the corrosion of roofs and various health complications. The acid rain, weak sulfuric acid, is formed when there is oxidation of this compound. The process takes place when sulfur dioxide reacts with oxygen and other chemical oxides, and together with the water rain, it becomes acid rain

8. Nitrates

Nitrates are a complex form of nitrogen and oxygen elements. The compound is associated with nitrate pollution,which causes water contamination from excessive amounts of nitrates washed out from food and animal waste as well as inorganic fertilizers. Once in excessive concentration in water bodies, it causes eutrophication - a contributing factor to the contamination of waterways and death of aquatic life.

9. Phosphorus

Like nitrates, phosphorus is associate with nutrient pollution that lead to eutrophication and harmful algal bloom.

10. PCBs (polychlorinated biphenyl)

This is an organic chlorine compound that was at one point extensively used as coolant fluids and dielectric in electrical gadgets, in heat transfer fluids, and in carbonless copy paper. It was banned in the US in 1979, but is still in use. PCBs are very dangerous pollutants since the chemicals are cancer causing and can adversely affect the life of fish and wild animals.

Comments

Popular posts from this blog

Thickening Process of Sludge In Waste Water Treatment

WHAT IS SLUDGE FROM WATER TREATMENT? Generally, it contains biosolids removed from liquid sewage. Sludge thickening is important because it is the process used in wastewater treatment centers to increase the solids concentration and decrease the free water. This step minimizes the load on the downstream processes,such as sludge dewatering and digestion. There's more to this process of course , and this article highlights how sludge thickening works and its general impact, as well as effective groundwater treatment solutions. HOW SLUDGE THICKENING WORKS? There are various processes used in sludge thickening.Each depends on the downstream process, the size of the wastewater plant, and the physical limitations associated with it. Gravity thickening involves using specially designed circular tanks that concentrate thin sludges to a more-dense sludge product.The limitation of this form of clarification water treatment is that it works mostly for the excess wat

The Environmental Impact Of An Incinerator

An incinerator is an industrial tool used in the treatment of munincipal-solid waste which uses a process of waste combustion to create electricity. This process is also known as waste-to-energy, but it is not without its hazards. Although the process of controlled combustion of waste is beneficial in that it reduces the amount of waste that ends up in a landfill, there are numerous environmental implications of using an incinerator to dispose of waste. These include the release of airborne toxins from burning plastics and metals, the contamination of food and water in the area the incinerator is in use and it inadvertently hinders the prevention of waste that could otherwise reduce the amount of toxic materials combusted for fuel. Waste-to-Energy : Environmental Impact In theory, waste-to-energy is a beneficial method for the production of electricity that does not require fossil fuels. However, the process is rife with negative externalities. In other words, the process has

Design of Sludge Drying Bed

Executive Summary Sludge drying bed (SDB) is the most widely used method for sludge dewatering.Sludge drying involves natural ways of drying to mechanical ways of removing water content.SDB is generally used for small and medium sized communities.The selection of the technology will depend upon land availability,climatic factors,the quantity and composition of the sludge.The construction of this is usually undertaken with civil structure.               Advantages                                                                                       1.Easy to operate                                                   2.No electrical energy required                              3. Organic content can be used as fertilizers                                                                                                                                                                            Disadvantages 1.Requires stabilised sludge to prevent nuisa